Skip to main content
Ctrl+K
empymod 2.4.0 documentation - Home empymod 2.4.0 documentation - Home
  • User Guide
  • Gallery
  • API reference
  • Development
  • emsig
  • GitHub
  • User Guide
  • Gallery
  • API reference
  • Development
  • emsig
  • GitHub

Section Navigation

  • Filters
    • DigitalFilter
    • Hankel
    • Fourier
  • Kernel
    • wavenumber
    • angle_factor
    • fullspace
    • greenfct
    • reflections
    • fields
    • halfspace
  • Model
    • bipole
    • dipole
    • loop
    • analytical
    • gpr
    • dipole_k
    • fem
    • tem
  • Transform
    • hankel_dlf
    • hankel_qwe
    • hankel_quad
    • fourier_dlf
    • fourier_qwe
    • fourier_fftlog
    • fourier_fft
    • dlf
    • qwe
    • get_dlf_points
    • get_fftlog_input
  • Utils
    • check_time_only
    • check_time
    • check_model
    • check_frequency
    • check_hankel
    • check_loop
    • check_dipole
    • check_bipole
    • check_ab
    • check_solution
    • get_abs
    • get_geo_fact
    • get_azm_dip
    • get_off_ang
    • get_layer_nr
    • printstartfinish
    • conv_warning
    • set_minimum
    • get_minimum
    • EMArray
    • Report
  • I/O
    • save_input
    • load_input
    • save_data
    • load_data
  • Filter Design
    • design
    • save_filter
    • load_filter
    • plot_result
    • print_result
    • j0_1
    • j0_2
    • j0_3
    • j0_4
    • j0_5
    • j1_1
    • j1_2
    • j1_3
    • j1_4
    • j1_5
    • sin_1
    • sin_2
    • sin_3
    • cos_1
    • cos_2
    • cos_3
    • empy_hankel
    • Ghosh
  • TM/TE split
    • dipole
  • API reference
  • Filter Design
  • print_result

print_result#

empymod.scripts.fdesign.print_result(filt, full=None)[source]#

Print best filter information.

Parameters:
- filt, full as returned from fdesign.design with full_output=True

previous

plot_result

next

j0_1
On this page
  • print_result
Show Source

© Copyright 2016-2024, The emsig community.

Created using Sphinx 8.1.3.

Built with the PyData Sphinx Theme 0.16.0.